Modifications performed on N47815

 

Date

 

 

5/30/1990

 

Installed 3M Ryan WX-1000 Stormscope

5/9/1990

 

Installed Bendix/King KLN-88 Loran, KA-83 Loran Antenna

4/20/92

 

Replaced #1 aluminum cables with #1 guage coper

7/22/93

 

Removed glove box and made new instrument panel

5/17/94

 

Installed Bob Fields Rubber Gaskets

5/17/94

 

Installed Precise Pulselite Model #1200/2405

5/17/94

 

Installed RMD Lighted Wing Tips

5/31/96

 

Installed Vortex Generator

5/6/97

 

Installed Flap Gap Seals

6/10/98

 

Installed Shadin Fuel Flow Indicating System

7/21/97

 

Installed Lopreti Speed Hub Caps

3/28/2000

 

Removed Collins radio.  Installed Garmin GNS-430

3/28/2001

 

Removed Collins transponder.  Installed Garmin GTX-327 transponder

6/26/2001

 

Removed Edo-Aire autopilot and replaced with STEC 60-2

1/17/2002

 

Removewd 3M WX-1000 Stormscope.  Replace with WX-500 Stormscope

2/18/2008

 

Installed Bob Fields Upgrade Pump Kit

3/7/2008

 

Installed Garmin GNS430W/530W

5/19/2011

 

Removed Garmin 430W/530W.  Installed Garmin GTN 750, GTB 650, GMA 35, GTX Mode c transponder, GDL 69XM, STEC GPSS

2/21/2012

 

Installed RAPCO Vacuum pump cooling kit

8/28/2014

 

Removed Insight EGT/CHT System and installed Insight GEM G4

11/7/2014

 

Installed GAMI Fuel Injectors

3/15/2015

 

Removed original pilot and co-pilot sun visors.  Installed Rosen Sun visors

4/2/2015

 

Removed Bracket engine air filter.  Installed Challenger air filter assembly

4/2/2015

 

Removed battery.  Install concede battery

6/11/2015

 

Installed LoiPresti speed spats

6/11/2015

 

Installed Knots 2U wing root fairings

10/8/2015

 

Removed Garmin GTX32 transponter.  Installed Garmin GDL88 ADS-B.  Installed Garmin Glightsteam 210.  Installed Garmin GTX33ES Mode S Transponter

5/5/2016

 

Installed Sandia SAI-340 Artifical Horizon

3/19/2017

 

Removed original engine cowl nosebowls.  Installed LoPresti Speed Nosebowls

5/19/2017

 

Removed 7th seat.  Installed placard “Maximum number of occupants 6”

7/16/2019

 

Installed JPI EDM-960 Engine Monitor